- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Work with user-configured auto-tests for tasks with this copper and fiber AutoTester that validates copper and fiber Ethernet connections in less than 10 seconds. In addition, this AutoTester makes it easier to find and solve connectivity problems by allowing network technicians to perform pre-set tests for tasks.
Work with user-configured auto-tests for tasks with this copper and fiber AutoTester that validates copper and fiber Ethernet connections in less than 10 seconds. In addition, this AutoTester makes it easier to find and solve connectivity problems by allowing network technicians to perform pre-set tests for tasks.
LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
Key features include verifying signal and link integrity at 10/100/1G over copper or fiber, unmatched TruePower™PoE testing and loading, 802.1x authentication, cable wiremapping, IPv4/IPv6 readiness, streamlined UI and color display, full documentation of test results with storage for 50 reports, location and identification of cabling runs, and nearest switch information.
With a three second startup and a user-defined AutoTest that performs your required set of connectivity tests in seconds, the LinkRunner ATenables you to quickly and accurately identify and solve network problems.
AutoTest runs 6 connectivity tests in seconds
Connect using copper or fiber, turn it on, and the LinkRunner AT shows the link status, connection type, and signal strength.
Then the LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information including:
100 MB link on copper with PoE on port 23
1 Gig link on fiber
You can quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, APs and phones ensures smooth deployment.
PoE setup
In addition to a ping, which is often blocked, the LinkRunner AT performs a TCP port open test to verify application connectivity through IPv4 and IPv6. Router, DNS and DHCP servers are reported, along with response time. Configure 10 additional devices to meet your requirements by URL or IPv4/IPv6 address and optional application port number.
Ping & TCP Port Connectivity
Verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager Software can be used to configure 802.1x EAP type, download certificates, and enter passwords.
802.1x failure
MAC ACLs can be validated using MAC spoofing.
Cable Tests
Locate cable runs with toning, port advertisement, link blinking, and wire-mapping with up to 6 cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Verification
Check patch cables using the built in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. The optional office locator kit allows identification of up to 6 unique ports for documenting cable plants.
Easily find opens, shorts, miswires, and split pairs three different ways:
Good Cable
A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #1
A cable with an open on 4 using the built in wiremap port
A mis-wired cable with pairs 3,6 & 4,5 split
The LinkRunner AT packet reflector mode allows it to be used as a remote device during throughput tests to validate LAN and WAN throughput capabilties up to 1GBps. Can be programmed to swap MAC and/or IP addresses.
LinkRunner supports packet reflection for:
LinkRunner Manager Software is included with the LinkRunner AT and lets you generate reports, manage LinkRunner AT profiles, and upgrade the LinkRunner AT firmware.
Document Results
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with the LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Profiles
Easily configure, manage, and control the use of your LinkRunner AT – or an entire fleet of them – with the Profiles feature, which includes the following settings:
Name and transfer up to 10 profiles into the LinkRunner AT. You can also transfer profiles from the LinkRunner AT to LinkRunner Manager software.
Profiles allow you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results. For example, use a profile to verify the connectivity to key devices.
Record Sessions
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Easy Upgrades
The mini-USB port allows software upgrades in the field in just minutes. And with Gold support, you’ll automatically receive upgrades at no additional charge.
LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features:
*These exclusive features cannot be added to the LinkRunner AT 1000.
The LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese, and Simplified Chinese. Multi-language support included the LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager software, help files and user reports.
See how the LinkRunner AT compares against the entire family of LinkRunner testers.
| Environmental | |
| Operating Temperature and Relative Humidity | 32 to 113ºF (0 to 45ºC) Note: Battery will not charge if internal temperature is above 113ºF (45ºC) |
| Operating Relative Humidity (% RH without condensation) |
90% (50 to 95ºF / 10 to 35ºC) 75% (95 to 113ºF / 35 to 45ºC) |
| Storage Temperature | -4 to 140ºF (-20 to 60ºC) |
| Shock and Vibration | Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop |
| Safety | EN 61010-1 2nd edition |
| Safety (LR-AT 2000 only) | EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only) |
| Altitude | 4,000 m; Storage: 12,000 m |
| EMC | FCC Part 15 Class A, EN 61326-1 |
| Certifications and Compliance | Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association |
| General | |
| Media Access; Copper | RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000 |
| Media Access; Fiber | SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only) |
| Cable Tests | Pair lengths, opens, shorts, splits, crossed, straight through and cable ID |
| Tone Generator | IntelliTone digital tone: [500 KHz]; Analog tones: [400 Hz, 1 KHz] |
| Dimensions | 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm) |
| Weight | 18 oz (0.5 kg) |
| Battery | Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) |
| Battery Life | Typical operating life is 6 hours; Typical charge time is 3 hours |
| External AC Adapter/Charger | AC input 90 to 264V AC48 to 62 Hz input power DC output 15V DC at 1.2 amps |
| Display | 2.8 in color LCD (320 x 240 pixels) |
| Keypad | 12-key elastomeric |
| LEDs | 2 LEDs (Link and Receive/Transmit indicators) |
| Host Interface | USB 5-pin mini-B |
| LinkRunner Manager Software | |
| Supported Operating Systems | Windows® Vista, Windows® XP, Windows® 7 |
| Processor | 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) |
| RAM | 96 MB (minimum); 256 MB (recommended) |
| Hard Disk | Up to 500 MB of available space may be required |
| Display | 1024 x 768 high color, 32-bit (recommended) |
Gold Support for your LinkRunner AT Network Auto-Testerallows you to make the most of yourpurchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.
What do you get with Gold Support for your LinkRunner AT Network Auto-Tester?
Repairs and loaner equipment - If your LinkRunner AT should fail, we'll deliver a loaner unit via next-day delivery to keep you up and running. We'll repair your LinkRunner AT and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.
Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of your LinkRunner and understand the results you are seeing.
Accessory Replacement - Some accessories are essential to your LinkRunner AT. The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.
Software upgrades - Your LinkRunner AT will never be out of date. You'll receive all software upgrades free.
Unlimited access to our Knowledge Base -You'll have an open door to valuable proprietary information we've gathered from helping customers over the years. It also includes helpful technical articles written by our experts.
Member Only promotions -Your membership qualifies you for Members Only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.
Ensure that you are getting the most out of your LinkRunner AT with Gold Support Services.
With a three second startup and a user-defined AutoTest that performs your required set of connectivity tests in seconds, the LinkRunner ATenables you to quickly and accurately identify and solve network problems.
AutoTest runs 6 connectivity tests in seconds
Connect using copper or fiber, turn it on, and the LinkRunner AT shows the link status, connection type, and signal strength.
Then the LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot, and port.
The LinkRunner AT displays critical nearest switch information including:
100 MB link on copper with PoE on port 23
1 Gig link on fiber
You can quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W. Load the circuit to stress switches, cabling and patch panels, all while measuring the voltage and pairs being used. The ability to validate the TruePower delivery before installing cameras, APs and phones ensures smooth deployment.
PoE setup
In addition to a ping, which is often blocked, the LinkRunner AT performs a TCP port open test to verify application connectivity through IPv4 and IPv6. Router, DNS and DHCP servers are reported, along with response time. Configure 10 additional devices to meet your requirements by URL or IPv4/IPv6 address and optional application port number.
Ping & TCP Port Connectivity
Verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner Manager Software can be used to configure 802.1x EAP type, download certificates, and enter passwords.
802.1x failure
MAC ACLs can be validated using MAC spoofing.
Cable Tests
Locate cable runs with toning, port advertisement, link blinking, and wire-mapping with up to 6 cable identifiers. Toning supports both analog and digital IntelliTone modes.
Cable Verification
Check patch cables using the built in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs. The optional office locator kit allows identification of up to 6 unique ports for documenting cable plants.
Easily find opens, shorts, miswires, and split pairs three different ways:
Good Cable
A mis-wired cable with pairs 1,2 and 7,8 swapped using cable identifier #1
A cable with an open on 4 using the built in wiremap port
A mis-wired cable with pairs 3,6 & 4,5 split
The LinkRunner AT packet reflector mode allows it to be used as a remote device during throughput tests to validate LAN and WAN throughput capabilties up to 1GBps. Can be programmed to swap MAC and/or IP addresses.
LinkRunner supports packet reflection for:
LinkRunner Manager Software is included with the LinkRunner AT and lets you generate reports, manage LinkRunner AT profiles, and upgrade the LinkRunner AT firmware.
Document Results
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with the LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Profiles
Easily configure, manage, and control the use of your LinkRunner AT – or an entire fleet of them – with the Profiles feature, which includes the following settings:
Name and transfer up to 10 profiles into the LinkRunner AT. You can also transfer profiles from the LinkRunner AT to LinkRunner Manager software.
Profiles allow you to standardize your critical tests into one or more profiles making it easy for staff to produce consistent test results. For example, use a profile to verify the connectivity to key devices.
Record Sessions
Save complete results of the current troubleshooting session for downloading to your PC with a push of a button. Then create reports with LinkRunner Manager to quickly close a trouble ticket or provide documentation for problem escalation. Press one key to record all collected details for:
Transfer sessions to a PC and easily view/store them using LinkRunner Manager software.
Easy Upgrades
The mini-USB port allows software upgrades in the field in just minutes. And with Gold support, you’ll automatically receive upgrades at no additional charge.
LinkRunner AT is available in two models: LRAT-2000 and LRAT-1000. LinkRunner AT 2000 adds the following exclusive* features:
*These exclusive features cannot be added to the LinkRunner AT 1000.
The LinkRunner AT fully supports multiple languages including English, French, German, Spanish, Portuguese, Russian, Japanese, and Simplified Chinese. Multi-language support included the LinkRunner AT user interface, getting started guide, user manual and supporting LinkRunner Manager software, help files and user reports.
See how the LinkRunner AT compares against the entire family of LinkRunner testers.
| Environmental | |
| Operating Temperature and Relative Humidity | 32 to 113ºF (0 to 45ºC) Note: Battery will not charge if internal temperature is above 113ºF (45ºC) |
| Operating Relative Humidity (% RH without condensation) |
90% (50 to 95ºF / 10 to 35ºC) 75% (95 to 113ºF / 35 to 45ºC) |
| Storage Temperature | -4 to 140ºF (-20 to 60ºC) |
| Shock and Vibration | Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop |
| Safety | EN 61010-1 2nd edition |
| Safety (LR-AT 2000 only) | EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only) |
| Altitude | 4,000 m; Storage: 12,000 m |
| EMC | FCC Part 15 Class A, EN 61326-1 |
| Certifications and Compliance | Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association |
| General | |
| Media Access; Copper | RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000 |
| Media Access; Fiber | SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only) |
| Cable Tests | Pair lengths, opens, shorts, splits, crossed, straight through and cable ID |
| Tone Generator | IntelliTone digital tone: [500 KHz]; Analog tones: [400 Hz, 1 KHz] |
| Dimensions | 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm) |
| Weight | 18 oz (0.5 kg) |
| Battery | Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) |
| Battery Life | Typical operating life is 6 hours; Typical charge time is 3 hours |
| External AC Adapter/Charger | AC input 90 to 264V AC48 to 62 Hz input power DC output 15V DC at 1.2 amps |
| Display | 2.8 in color LCD (320 x 240 pixels) |
| Keypad | 12-key elastomeric |
| LEDs | 2 LEDs (Link and Receive/Transmit indicators) |
| Host Interface | USB 5-pin mini-B |
| LinkRunner Manager Software | |
| Supported Operating Systems | Windows® Vista, Windows® XP, Windows® 7 |
| Processor | 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) |
| RAM | 96 MB (minimum); 256 MB (recommended) |
| Hard Disk | Up to 500 MB of available space may be required |
| Display | 1024 x 768 high color, 32-bit (recommended) |
Gold Support for your LinkRunner AT Network Auto-Testerallows you to make the most of yourpurchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.
What do you get with Gold Support for your LinkRunner AT Network Auto-Tester?
Repairs and loaner equipment - If your LinkRunner AT should fail, we'll deliver a loaner unit via next-day delivery to keep you up and running. We'll repair your LinkRunner AT and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.
Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of your LinkRunner and understand the results you are seeing.
Accessory Replacement - Some accessories are essential to your LinkRunner AT. The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.
Software upgrades - Your LinkRunner AT will never be out of date. You'll receive all software upgrades free.
Unlimited access to our Knowledge Base -You'll have an open door to valuable proprietary information we've gathered from helping customers over the years. It also includes helpful technical articles written by our experts.
Member Only promotions -Your membership qualifies you for Members Only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.
Ensure that you are getting the most out of your LinkRunner AT with Gold Support Services.
