Dwyer MPC Series Pump Controllers

Model Selection

Dwyer MPC Pump Controller
MPC	$1,135.09 USD Was: $1,214.00	Availability: 5 Days
Dwyer MPC-232 Pump Controller, w/RS232
MPC-232	$1,469.59 USD Was: $1,571.75	Availability: 3 to 4 Weeks
Dwyer MPC-485 Pump Controller, w/RS485
MPC-485	$1,424.01 USD Was: $1,523.00	Availability: 5 to 6 Weeks

Show More Models...

Model Selection

Provides versatile level control in a standard 1/4 DIN package. Designed for use with almost any style level transmitter the unit displays the present level and main set point value. Incorporated in the MPC is programmable level differential for on/off control of one or two pumps, valves, or other devices through two SPDT relays.

Dwyer MPC Pump Controller
MPC	$1,135.09 USD Was: $1,214.00	Availability: 5 Days
Dwyer MPC-232 Pump Controller, w/RS232
MPC-232	$1,469.59 USD Was: $1,571.75	Availability: 3 to 4 Weeks
Dwyer MPC-485 Pump Controller, w/RS485
MPC-485	$1,424.01 USD Was: $1,523.00	Availability: 5 to 6 Weeks

Dwyer MPC Series Offers

Features

Pin Mode (6 to 60% Douglas Fir) helps to locate the source of moisture below the surface
User adjustable alarm signals when a pre-selected moisture threshold has been exceeded
Hold function captures measurements taken in hard to reach areas
Backlit display with streamlined interface
Keypad designed for easy, one-finger control
Ergonomic, rubber grip handle
Model TECHCHECK/PKG: Includes meter, 21-E electrode and carrying case

Functional Specifications

Inputs: 4 (or 0) to 20 mA DC or 2 (or 0) to 10 VDC selectable
Input Impedance: Current = 10 ohms, Voltage = 100 K ohms
Output Ratings: Control Relays: SPDT, rated 10A @ 240 VAC res., 1/4 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm Relays: SPST, 3A @ 240 VAC res., 1/10 hp @ 120 VAC
Accuracy: ±0.25% of span, ±1 least significant digit
Display: Two 4-digit, 7 segment 0.56" high LEDs
Display Resolution: 1 count
Memory Backup: Nonvolatile memory (no batteries required)
Serial Communications: Optional RS-232 or RS-485 with Modbus protocol
Ambient Operating Temperature/RH: 14 to 131°F (-10 55°C)/0 to 90% up to 104°F (40°C) non-condensing, 10 to 50% at 131°F (55°C) non-condensing
Front Panel Rating: Meets UL Type 4X (IP66)
Loop Power Supply (isolated): 24 VDC @ 50 mA, regulated
Seal Failure (Moisture Sensor): Power: 2.5 VDC
Search Current: 3 micro amps
Resolution: 10K to 500K ohms in 10K ohm steps

General Specifications

Control Type: On/off, reverse (pump out) or direct (pump in) acting
Power Requirements: 100 to 240 VAC nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 VDC nominal, +10%-15%
Power Consumption: 7.5 VA maximum
Weight: 16 oz (454 g)

What's included with the Dwyer MPC Series

Dwyer MPC Series Pump Controllers

Ask a question about Dwyer MPC Series Pump Controllers

Customer Reviews for the Dwyer MPC Series

Description ➕➖

Dwyer MPC Series Offers

Features

Pin Mode (6 to 60% Douglas Fir) helps to locate the source of moisture below the surface
User adjustable alarm signals when a pre-selected moisture threshold has been exceeded
Hold function captures measurements taken in hard to reach areas
Backlit display with streamlined interface
Keypad designed for easy, one-finger control
Ergonomic, rubber grip handle
Model TECHCHECK/PKG: Includes meter, 21-E electrode and carrying case

Functional Specifications

Inputs: 4 (or 0) to 20 mA DC or 2 (or 0) to 10 VDC selectable
Input Impedance: Current = 10 ohms, Voltage = 100 K ohms
Output Ratings: Control Relays: SPDT, rated 10A @ 240 VAC res., 1/4 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm Relays: SPST, 3A @ 240 VAC res., 1/10 hp @ 120 VAC
Accuracy: ±0.25% of span, ±1 least significant digit
Display: Two 4-digit, 7 segment 0.56" high LEDs
Display Resolution: 1 count
Memory Backup: Nonvolatile memory (no batteries required)
Serial Communications: Optional RS-232 or RS-485 with Modbus protocol
Ambient Operating Temperature/RH: 14 to 131°F (-10 55°C)/0 to 90% up to 104°F (40°C) non-condensing, 10 to 50% at 131°F (55°C) non-condensing
Front Panel Rating: Meets UL Type 4X (IP66)
Loop Power Supply (isolated): 24 VDC @ 50 mA, regulated
Seal Failure (Moisture Sensor): Power: 2.5 VDC
Search Current: 3 micro amps
Resolution: 10K to 500K ohms in 10K ohm steps

General Specifications

Control Type: On/off, reverse (pump out) or direct (pump in) acting
Power Requirements: 100 to 240 VAC nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 VDC nominal, +10%-15%
Power Consumption: 7.5 VA maximum
Weight: 16 oz (454 g)

Included ➕➖