Portable and versatile, this multi-gas detector for confined spaces detects LEL/O2/H2S/CO and comes with Li-ion and alkaline battery packs. In addition, it features high-quality micro-sensor technology and three operating modes: Normal for safety monitoring, Leak check for leak investigations and Bar Hole for underground leak checks.
Portable and versatile, this multi-gas detector for confined spaces detects LEL/O2/H2S/CO and comes with Li-ion and alkaline battery packs. In addition, it features high-quality micro-sensor technology and three operating modes: Normal for safety monitoring, Leak check for leak investigations and Bar Hole for underground leak checks.
Capable of displaying all gas readings, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms, which can be set to latching or non-latching. In addition, it comes with a microprocessor that continuously checks itself for sensor connections, low battery, circuit trouble, low flow, and calibration errors.
Features
Applications
Detection Principle | Combustible Gases (Methane as standard): Catalytic combustion % Volume Methane: Thermal conductivity Oxygen (O2): Galvanic cell Hydrogen Sulfide (H2S): Electrochemical cell Carbon Monoxide (CO): Electrochemical cell |
Detection Range | Combustible Gases (Methane as standard): 0 to 100% LEL, 0 to 500/1000/2000/5000 ppm % Volume Methane: 0 to 100% volume Oxygen (O2): 0 to 40% volume Hydrogen Sulfide (H2S): 0 to 100 ppm (optional 0 to 500 ppm) Carbon Monoxide (CO): 0 to 500 ppm |
Accuracy Statement (whichever is greater) | Combustible Gases (Methane as standard): ±5% of reading or ±2% LEL (LEL mode only) % Volume Methane: ±5% of reading or ±2% of full scale Oxygen (O2): ±0.5% O2 Hydrogen Sulfide (H2S): ±5% of reading or ±2 ppm H2S Carbon Monoxide (CO): ±5% of reading or ±5 ppm CO |
Preset Alarms (User Adjustable) | Combustible Gases (Methane as standard): 1st alarm 10% LEL;
2nd alarm 50% LEL; Over alarm 100% LEL % Volume Methane: No alarms for % volume CH4 Oxygen (O2): Low alarm 19.5%; High alarm 23.5%; Over alarm 40% Hydrogen Sulfide (H2S): 1st 5 ppm; 2nd 30 ppm; TWA 10 ppm; STEL 15 ppm; Over 100 ppm Carbon Monoxide (CO): 1st 25 ppm; 2nd 50 ppm; TWA 25 ppm; STEL 200 ppm; Over 500 ppm |
Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter |
Display | Digital LCD with 7 segments, auto backlight during alarm |
Operating Conditions | Temperature: -4 to 122°F (-20 to 50°C) Humidity: 0 to 95% RH, non-condensing |
Response Time | Within 30 seconds (T90) |
Continuous Operation | Alkaline battery: 15 hours Li-ion battery: 10 hours 70°F (21°C) |
Power Source | Li-ion battery pack, or 3 "AA" Alkaline battery pack; interchangeable |
Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe. Class I, Division 1, Groups A, B, C, D (optional version available) |
Controls | Five buttons: POWER/ENTER, DISPLAY, AIR, RESET, SHIFT |
Case Material | High dust and water resistant design RFI shielded high impact plastic with protective rubber overmolding |
Dimensions | 5.6 x 2.8 x 1.6" (143 x 71 x 43 mm) |
Weight | 12.3 oz lbs (350 g) |
Detection Principle | Combustible Gases (Methane as standard): Catalytic combustion % Volume Methane: Thermal conductivity Oxygen (O2): Galvanic cell Hydrogen Sulfide (H2S): Electrochemical cell Carbon Monoxide (CO): Electrochemical cell |
Detection Range | Combustible Gases (Methane as standard): 0 to 100% LEL, 0 to 500/1000/2000/5000 ppm % Volume Methane: 0 to 100% volume Oxygen (O2): 0 to 40% volume Hydrogen Sulfide (H2S): 0 to 100 ppm (optional 0 to 500 ppm) Carbon Monoxide (CO): 0 to 500 ppm |
Accuracy Statement (whichever is greater) | Combustible Gases (Methane as standard): ±5% of reading or ±2% LEL (LEL mode only) % Volume Methane: ±5% of reading or ±2% of full scale Oxygen (O2): ±0.5% O2 Hydrogen Sulfide (H2S): ±5% of reading or ±2 ppm H2S Carbon Monoxide (CO): ±5% of reading or ±5 ppm CO |
Preset Alarms (User Adjustable) | Combustible Gases (Methane as standard): 1st alarm 10% LEL;
2nd alarm 50% LEL; Over alarm 100% LEL % Volume Methane: No alarms for % volume CH4 Oxygen (O2): Low alarm 19.5%; High alarm 23.5%; Over alarm 40% Hydrogen Sulfide (H2S): 1st 5 ppm; 2nd 30 ppm; TWA 10 ppm; STEL 15 ppm; Over 100 ppm Carbon Monoxide (CO): 1st 25 ppm; 2nd 50 ppm; TWA 25 ppm; STEL 200 ppm; Over 500 ppm |
Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter |
Display | Digital LCD with 7 segments, auto backlight during alarm |
Operating Conditions | Temperature: -4 to 122°F (-20 to 50°C) Humidity: 0 to 95% RH, non-condensing |
Response Time | Within 30 seconds (T90) |
Continuous Operation | Alkaline battery: 15 hours Li-ion battery: 10 hours 70°F (21°C) |
Power Source | Li-ion battery pack, or 3 "AA" Alkaline battery pack; interchangeable |
Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe. Class I, Division 1, Groups A, B, C, D (optional version available) |
Controls | Five buttons: POWER/ENTER, DISPLAY, AIR, RESET, SHIFT |
Case Material | High dust and water resistant design RFI shielded high impact plastic with protective rubber overmolding |
Dimensions | 5.6 x 2.8 x 1.6" (143 x 71 x 43 mm) |
Weight | 12.3 oz lbs (350 g) |