Designed with simplicity and functionality in mind the MRC 5000 come in two basic versions for trend recording-one or two pens. It's operation is easy and all of its instructions fit on one 4" x 6" card. The straightforwardness of the Partlow MRC 5000 Circular Chart Recorders is immediately evident just by looking at the unit's face. The operator interface, a four-digit display with three button keypad is made for simple operation, easy configuration and rapid access to all configuration and operation data. For reliability the two pens, each with configurable spans, are positioned smoothly and the 10" chart rotates at the speed you select. And don't worry about harsh environments the Partlow MRC 5000 Circular Chart Recorders come standard with a NEMA 3 rating.
Designed with simplicity and functionality in mind the MRC 5000 come in two basic versions for trend recording-one or two pens. It's operation is easy and all of its instructions fit on one 4" x 6" card. The straightforwardness of the Partlow MRC 5000 Circular Chart Recorders is immediately evident just by looking at the unit's face. The operator interface, a four-digit display with three button keypad is made for simple operation, easy configuration and rapid access to all configuration and operation data. For reliability the two pens, each with configurable spans, are positioned smoothly and the 10" chart rotates at the speed you select. And don't worry about harsh environments the Partlow MRC 5000 Circular Chart Recorders come standard with a NEMA 3 rating.
Designed with the latest innovation in recording technology, enclosures and functionality, the MRC 5000 is slim, trim and simple. With it's compact 2.5" panel depth and short 1.3" protrusion from the front panel, finding a place to install this recorder is easy. The MRC 5000 is housed in an injection molded Noryl enclosure which can be panel or surface mounted.
The two pens, each with configurable spans, are positioned smoothly without any slidewire feedback; this simplifies design and improves reliability. In addition, the 10" chart rotates at the speeds you select.
The operator interface also provides access to test and calibration facilities with a convenient dual function MODE switch. As if configuring the Partlow MRC 5000 Circular Chart Recorders wasn't easy enough already, there's also an optional Configurator port for ultimate programming ease. Using the optional PC program, parameters can be modified, saved, and downloaded in seconds.
The cutout size for the MRC 5000 is the commonly utilized 12.7" square cutout. A quick look inside the casing and at the chart itself also speaks to the straightforward, functional design of the Partlow MRC 5000 Circular Chart Recorders. You will find just one jumper to configure each port!
Standard Features
Optional Capabilities
Key Specifications
Agency Approvals
Current DC | 0 to 20 mA, 4 to 20 mA, Internal 4.7 ohm Shunt Resistor |
Voltage DC | 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
Impedance | > 100M ohm for TC and mV inputs, 100K ohms for 5 V inputs, 4.7 ohms for mA inputs |
RTD Excitation Current | 150 microamps, typical |
Input Scan Rate | 1 scan per second for non-RTD inputs, 1 scan per 1.2 seconds for RTD inputs |
Input Correction | Offset Adjustment, -999 to 999 units |
Sensor Fault Detection | Display goes to "SnSr" and pen goes upscale if a sensor break is detected. No sensor break can be detected for zero based Volt and Milliamp ranges. Display goes to "Hi" 10% above span. Display goes "Lo" 10% below span or zero, whichever is higher. |
Pen Type | Disposable fiber tip |
Pen Color | Pen 1 - Red, Pen 2 - Green |
Chart Size | 10 inch |
Chart Drive | Stepper motor |
Chart Rotation | User configurable: 8 hours, 12 hours, 24 hours, 48 hours, or 7 days |
Chart Span | Bottom and top of span, -9999 to 9999 units |
Chart Recording Accuracy | 0.5% of chart span reference accuracy |
Chart Rotation Accuracy | -0.5% of rotation time, assuming all backlash removed |
Display | Four digit, 0.56" high, red, seven segment, LED display |
Status Indicators | Five red LED alarm status indicators, One green LED Pen 2 indicator |
Keypad | Three keys for programming and unit operation |
Display Modes | Normal: Process value(s) or blank |
Hysteresis | Fully adjustable, 0 to 200 units, single sided |
Line Voltage | 90-264 VAC, 50/60 Hz |
Operating Temperature | 0 C to 50 C (32 F to 122 F) |
Weight | 15lbs maximum |
Current DC | 0 to 20 mA, 4 to 20 mA, Internal 4.7 ohm Shunt Resistor |
Voltage DC | 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
Impedance | > 100M ohm for TC and mV inputs, 100K ohms for 5 V inputs, 4.7 ohms for mA inputs |
RTD Excitation Current | 150 microamps, typical |
Input Scan Rate | 1 scan per second for non-RTD inputs, 1 scan per 1.2 seconds for RTD inputs |
Input Correction | Offset Adjustment, -999 to 999 units |
Sensor Fault Detection | Display goes to "SnSr" and pen goes upscale if a sensor break is detected. No sensor break can be detected for zero based Volt and Milliamp ranges. Display goes to "Hi" 10% above span. Display goes "Lo" 10% below span or zero, whichever is higher. |
Pen Type | Disposable fiber tip |
Pen Color | Pen 1 - Red, Pen 2 - Green |
Chart Size | 10 inch |
Chart Drive | Stepper motor |
Chart Rotation | User configurable: 8 hours, 12 hours, 24 hours, 48 hours, or 7 days |
Chart Span | Bottom and top of span, -9999 to 9999 units |
Chart Recording Accuracy | 0.5% of chart span reference accuracy |
Chart Rotation Accuracy | -0.5% of rotation time, assuming all backlash removed |
Display | Four digit, 0.56" high, red, seven segment, LED display |
Status Indicators | Five red LED alarm status indicators, One green LED Pen 2 indicator |
Keypad | Three keys for programming and unit operation |
Display Modes | Normal: Process value(s) or blank |
Hysteresis | Fully adjustable, 0 to 200 units, single sided |
Line Voltage | 90-264 VAC, 50/60 Hz |
Operating Temperature | 0 C to 50 C (32 F to 122 F) |
Weight | 15lbs maximum |