Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Model: U20-001-02

Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Model: U20-001-02

No-vent-tube design for easy and reliable deployment. Ideal for recording water levels and temperatures in wells, streams, lakes, wetlands and tidal estuaries.

No-vent-tube design for easy and reliable deployment. Ideal for recording water levels and temperatures in wells, streams, lakes, wetlands and tidal estuaries.

Regular Price $599.00 USD
Availability 1 to 2 Weeks
Quantity

Onset HOBO U20-001-02 Offers

HOBO Water Level data loggers offer high accuracy at an affordable price, with no cumbersome vent tubes or desiccants to maintain. These data loggers are ideal for recording water levels and temperatures in wells, streams, lakes, wetlands and tidal estuaries.

Features

  • Lightning protection - no long signal wires, and electronics are shielded in stainless steel housing for use in freshwater
  • HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure (see demo) temperature, and water density
  • Multiple-rate sampling (see demo) allows faster sampling at critical times such as when pumping starts or stops
  • 100-Foot Depth
  • Ideal for use in wells, streams, lakes, wetlands and tidal areas
  • No-vent-tube design for easy reliable deployment
  • Stainless Steel versions
  • Durable ceramic pressure sensor
  • 3-point NIST-traceable calibration certificate included

Applications

  • Underwater Research
  • River Restoration
  • Wetlands Monitoring
  • Tidal Studies
  • Residential Well Monitoring
  • Hurricane Surge Tracking

Onset HOBO U20-001-02 Specifications

Pressure and Water Level Measurements Operation Range 0 to 207 kPa (0 to 30 psia); Approximately 0 to 9 m (0 to 30 ft) of Water Depth at Sea Level, or 0 to 12 m (0 to 40 ft) of Water at 3,000 m (10,000 ft) of Altitude
Factory Calibrated Range 69 to 207 kPa (10 to 30 psia), 0 to 40°C (32 to 104°F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) Depth
Water Level Accuracy Typical Error: ±0.05% FS, 0.5 cm (0.015 ft) Water
Maximum Error: ±0.1% FS, 1.0 cm (0.03 ft) Water
Raw Pressure Accuracy ±0.3% FS, 0.62 kPa (0.09 psi) Maximum Error
Resolution <0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) Water
Pressure Response Time (90%) <1 Second; Measurement Accuracy Also Depends On Temperature Response Time
Temperature Measurements Operation Range -20 to 50°C (-4 to 122°F)
Accuracy ±0.44°C from 0 to 50°C (±0.79°F from 32 to 122°F), See Plot A in Manual
Resolution 0.10°C at 25°C (0.18°F at 77°F), See Plot A in Manual
Response Time (90%) 5 Minutes in Water (Typical)
Stability (Drift) 0.1°C (0.18°F) Per Year
Real-Time Clock ± 1 Minute Per Month 0 to 50°C (32 to 122°F)
Battery 2/3 AA, 3.6 Volt Lithium, Factory-Replaceable
Battery Life (Typical Use) 5 Years With 1 Minute or Greater Logging Interval
Memory (Non-Volatile) 64K Bytes Memory (Approx. 21,700 Pressure and Temperature Samples)
Weight Stainless Steel Models: Approximately 210 g (7.4 oz)
Click here for complete specifications on the Onset HOBO U20-001-02

What's included with the Onset HOBO U20-001-02

  • Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Click on a category to view a selection of compatible accessories with the Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel.

Onset HOBO CABLE-1-50 Stainless Steel Cable, 50' CABLE-1-50
A 50-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.




Onset HOBO CABLE-1-300 Stainless Steel Cable, 300' CABLE-1-300
A 300-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.




Onset HOBO BHW-PRO-DLD Onset HOBOware PRO Software v.3.x, Mac/Windows download BHW-PRO-DLD
HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants.




Onset HOBO U20-CASE-1 Carrying Case for Water Level Data Logger U20-CASE-1
A hard-sided case with foam inserts that holds four HOBO Water Level Data Loggers and an Optic USB Base Station or Waterproof Shuttle.




Onset HOBO HOUSING-U2X Protective Mounting Enclosure HOUSING-U2X
A protective enclosure for mounting U24 conductivity and U20 water level data loggers. The U2X housing is designed to allow a data logger to be mounted in harsh environments while not restricting the flow of media around the device.




Ask a question about Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Customer Reviews for the Onset HOBO U20-001-02

Onset HOBO U20-001-02 Offers

HOBO Water Level data loggers offer high accuracy at an affordable price, with no cumbersome vent tubes or desiccants to maintain. These data loggers are ideal for recording water levels and temperatures in wells, streams, lakes, wetlands and tidal estuaries.

Features

  • Lightning protection - no long signal wires, and electronics are shielded in stainless steel housing for use in freshwater
  • HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure (see demo) temperature, and water density
  • Multiple-rate sampling (see demo) allows faster sampling at critical times such as when pumping starts or stops
  • 100-Foot Depth
  • Ideal for use in wells, streams, lakes, wetlands and tidal areas
  • No-vent-tube design for easy reliable deployment
  • Stainless Steel versions
  • Durable ceramic pressure sensor
  • 3-point NIST-traceable calibration certificate included

Applications

  • Underwater Research
  • River Restoration
  • Wetlands Monitoring
  • Tidal Studies
  • Residential Well Monitoring
  • Hurricane Surge Tracking

Onset HOBO U20-001-02 Specifications

Pressure and Water Level Measurements Operation Range 0 to 207 kPa (0 to 30 psia); Approximately 0 to 9 m (0 to 30 ft) of Water Depth at Sea Level, or 0 to 12 m (0 to 40 ft) of Water at 3,000 m (10,000 ft) of Altitude
Factory Calibrated Range 69 to 207 kPa (10 to 30 psia), 0 to 40°C (32 to 104°F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) Depth
Water Level Accuracy Typical Error: ±0.05% FS, 0.5 cm (0.015 ft) Water
Maximum Error: ±0.1% FS, 1.0 cm (0.03 ft) Water
Raw Pressure Accuracy ±0.3% FS, 0.62 kPa (0.09 psi) Maximum Error
Resolution <0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) Water
Pressure Response Time (90%) <1 Second; Measurement Accuracy Also Depends On Temperature Response Time
Temperature Measurements Operation Range -20 to 50°C (-4 to 122°F)
Accuracy ±0.44°C from 0 to 50°C (±0.79°F from 32 to 122°F), See Plot A in Manual
Resolution 0.10°C at 25°C (0.18°F at 77°F), See Plot A in Manual
Response Time (90%) 5 Minutes in Water (Typical)
Stability (Drift) 0.1°C (0.18°F) Per Year
Real-Time Clock ± 1 Minute Per Month 0 to 50°C (32 to 122°F)
Battery 2/3 AA, 3.6 Volt Lithium, Factory-Replaceable
Battery Life (Typical Use) 5 Years With 1 Minute or Greater Logging Interval
Memory (Non-Volatile) 64K Bytes Memory (Approx. 21,700 Pressure and Temperature Samples)
Weight Stainless Steel Models: Approximately 210 g (7.4 oz)
Click here for complete specifications on the Onset HOBO U20-001-02

What's included with the Onset HOBO U20-001-02

  • Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Click on a category to view a selection of compatible accessories with the Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel.

Onset HOBO CABLE-1-50 Stainless Steel Cable, 50' CABLE-1-50
A 50-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.




Onset HOBO CABLE-1-300 Stainless Steel Cable, 300' CABLE-1-300
A 300-foot length of 1/16-inch diameter teflon-coated stainless steel cable, coiled and bound.




Onset HOBO BHW-PRO-DLD Onset HOBOware PRO Software v.3.x, Mac/Windows download BHW-PRO-DLD
HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants.




Onset HOBO U20-CASE-1 Carrying Case for Water Level Data Logger U20-CASE-1
A hard-sided case with foam inserts that holds four HOBO Water Level Data Loggers and an Optic USB Base Station or Waterproof Shuttle.




Onset HOBO HOUSING-U2X Protective Mounting Enclosure HOUSING-U2X
A protective enclosure for mounting U24 conductivity and U20 water level data loggers. The U2X housing is designed to allow a data logger to be mounted in harsh environments while not restricting the flow of media around the device.




Ask a question about Onset HOBO U20-001-02 Water Level Data Logger, 100', stainless steel

Customer Reviews for the Onset HOBO U20-001-02

More Onset HOBO Products

Calibration Lab