- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Monitoring Solutions for Water, Indoor, Outdoor, & Agriculture
A compact and durable battery-powered water level monitoring station that is cellular and web-enabled. Features pre-programmed water flow formulas for select weirs, flumes, and a stage-discharge table results in an easy and intuitive configuration, along with water flow and accumulated rainfall calculations.
A compact and durable battery-powered water level monitoring station that is cellular and web-enabled. Features pre-programmed water flow formulas for select weirs, flumes, and a stage-discharge table results in an easy and intuitive configuration, along with water flow and accumulated rainfall calculations.
The water level station is a cellular, web-enabled water level monitoring solution for stormwater, floodwater, irrigation, hydrologic, and environmental applications. Pre-programmed waterflow formulas for select weirs, flumes, and a stage-discharge table result in an easy and intuitive configuration. Features water flow and accumulated rainfall calculations, which are performed directly on the station at the time of measurement, trigger immediate notifications of critical water level conditions. The compact and durable station, together with the non-vented water level sensor, enables harsh condition deployments and reliable monitoring. The battery power, with a wide range of plug-and-play smart sensors, support flexible environmental monitoring.
Features
*Solar panel is not included with RX2103 model
Measure the flow of water in open canals
*Solar panel is not included with RX2103 model
Measure the height of water to help prevent flooding
*Solar panel is not included with RX2103 model
Use the water station in conjunction with a weir to regulate/alter water flow
With a compact and rugged design, the MicroRX Station provides long-term reliable performance, even in harsh conditions.
Soil Moisture
Temperature & Humidity
Rainfall
Light-PAR & Solar Radiation
Wind Speed & Direction
Leaf Wetness
Barometric Pressure
Water Level
Calculated Evapo-transpiration
This data logger is operates in both indoor and outdoor environments including:
Environmental research
Rugged and reliable microclimate monitoring in harsh field conditions, with access to your data from anywhere.
Agricultural research
Field condition monitoring and data collection to help save water, enhance crop quality, and increase yields.
Commercial agriculture
Critical field condition monitoring for optimal irrigation, pest control, and harvest timing decisions.
| Operating Range | -40 to 140°F (-40 to 60°C) |
| Smart Sensor Connectors | 5 |
| Smart Sensor Network Cable Length | 328' (100 m) maximum |
| Smart Sensor Data Channels | Maximum of 15 (some smart sensors use more than one data channel) |
| Logging Rate | 1 minute to 18 hours |
| Time Accuracy | ±8 seconds per month in 32 to 104°F (0 to 40°C) range ±30 seconds per month in -40 to 140°F (-40 to 60°C) range |
| Battery Type/Power Source | 6 x AA 1.5 V lithium batteries or AC power adapter |
| Battery Life | Daily connections: 1 year with 1 minute logging Hourly connections and 1 minute logging: 2 months |
| Memory | 16 MB, 1 million measurements, continuous logging |
| Alarm Notification Latency | Logging interval plus 2 to 4 minutes, typical |
| Enclosure Access | Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
| LCD | LCD is visible from 32 to 122°F (0 to 50°C); the LCD may react slowly or go blank in temperatures outside this range |
| Materials | Outer enclosure: Polycarbonate/PBT blend with brass inserts Interior: Polycarbonate/PBT Gasket: Silicone foam Cable channel: Santoprene™ TPE |
| Environmental Rating | Weatherproof enclosure, NEMA 4X and IP66 (requires proper installation of cable channelsystem) |
| Wireless Radio | GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz |
| Antenna | 4G LTE |
| Dimensions | 7.85 x 5.39 x 2.95" (19.95 x 13.68 x 7.49 cm) |
| Weight | 23.9 oz (678 g) |
| Certifications | CE, FCC ID QIPPLS62-W, IC ID:7830A-PLS62W |
Weather stations, like the HOBO RX3000 series, monitor environmental parameters such as temperature, wind speed, wind direction, rainfall, soil moisture, barometric pressure and photosynthetically-active radiation (PAR).
Moreover, their deployments are often located in harsh environments. Since weather stations monitor conditions 24/7 at a specific site, researchers can obtain precise measurements instead of making estimates based on regional weather data.
The following is a short guide on proper weather station deployment and safe practises. For a full, in-depth run-down on weather station deployment, please read the full guide here!
A typical weather station consists of a data logger and sensors mounted on a metal tripod.
The system typically runs on battery power or a combination of solar power and a rechargeable battery.
Key components of a weather station include:
Some researchers need data on general weather conditions for an area. In these applications, researchers should place their weather stations in open, unobstructed locations. Buildings and trees can affect temperature, relative humidity, rainfall, wind speed, and wind direction. For this reason, weather stations should also be at a distance of at least ten times the height of nearby trees and buildings away from these obstructions.
Weather stations should be located at least ten times the height of nearby trees and buildings away from these obstructions.
Accurate soil moisture measurement probes need to have good contact with surrounding soil. Here are some tips to help with installation:
After installing the sensor into the soil, partially backfill the hole, allowing soil to settle around the sensor. Pack the soil to the same density as the undisturbed soil. Then thoroughly water the soil around the sensor to cause the soil to fully settle around the sensor.
While some data logging weather stations can be difficult to configure and often require the services of a professional system integrator for setup, today’s most advanced systems do not require programming or complex wiring. Instead, these systems leverage Smart Sensor technology, that provides the user with plug-and-play performance: once a sensor is plugged into the data logger, it is automatically recognized and can begin taking measurements. This type of system architecture can significantly reduce setup and deployment time, and reduce or eliminate the need for specialized integrator assistance.
Lawn mowers, tractors, and chemicals can damage sensor cables. Moreover, rodents, birds, cattle, and other animals can bite, peck, or trample on sensor cables. For this reason, researchers often cover cables with conduit.
Proper grounding of a weather station is advisable, as it provides protection from electrical interference and thus can help minimize the chance of system failures in the field.
As a general rule, replace rechargeable batteries every 3 to 5 years and regular batteries once a year. However, battery life depends on logging intervals. For example, with certain weather stations, if the logging interval is set at 1 second, the batteries last 30 to 50 days. If the interval is set at 1 minute, the batteries should last one year. Furthermore, make sure the batteries’ Use Before dates are at least two years from the current date.
Relative humidity, barometric pressure, wind direction and wind speed, and PAR sensors should be checked or calibrated annually.
For even more on this, read our full guide!
Click on a category to view a selection of compatible accessories with the Onset HOBO RX2103 MicroRX Water Level Station, battery-powered.
| Operating Range | -40 to 140°F (-40 to 60°C) |
| Smart Sensor Connectors | 5 |
| Smart Sensor Network Cable Length | 328' (100 m) maximum |
| Smart Sensor Data Channels | Maximum of 15 (some smart sensors use more than one data channel) |
| Logging Rate | 1 minute to 18 hours |
| Time Accuracy | ±8 seconds per month in 32 to 104°F (0 to 40°C) range ±30 seconds per month in -40 to 140°F (-40 to 60°C) range |
| Battery Type/Power Source | 6 x AA 1.5 V lithium batteries or AC power adapter |
| Battery Life | Daily connections: 1 year with 1 minute logging Hourly connections and 1 minute logging: 2 months |
| Memory | 16 MB, 1 million measurements, continuous logging |
| Alarm Notification Latency | Logging interval plus 2 to 4 minutes, typical |
| Enclosure Access | Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
| LCD | LCD is visible from 32 to 122°F (0 to 50°C); the LCD may react slowly or go blank in temperatures outside this range |
| Materials | Outer enclosure: Polycarbonate/PBT blend with brass inserts Interior: Polycarbonate/PBT Gasket: Silicone foam Cable channel: Santoprene™ TPE |
| Environmental Rating | Weatherproof enclosure, NEMA 4X and IP66 (requires proper installation of cable channelsystem) |
| Wireless Radio | GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz |
| Antenna | 4G LTE |
| Dimensions | 7.85 x 5.39 x 2.95" (19.95 x 13.68 x 7.49 cm) |
| Weight | 23.9 oz (678 g) |
| Certifications | CE, FCC ID QIPPLS62-W, IC ID:7830A-PLS62W |
Weather stations, like the HOBO RX3000 series, monitor environmental parameters such as temperature, wind speed, wind direction, rainfall, soil moisture, barometric pressure and photosynthetically-active radiation (PAR).
Moreover, their deployments are often located in harsh environments. Since weather stations monitor conditions 24/7 at a specific site, researchers can obtain precise measurements instead of making estimates based on regional weather data.
The following is a short guide on proper weather station deployment and safe practises. For a full, in-depth run-down on weather station deployment, please read the full guide here!
A typical weather station consists of a data logger and sensors mounted on a metal tripod.
The system typically runs on battery power or a combination of solar power and a rechargeable battery.
Key components of a weather station include:
Some researchers need data on general weather conditions for an area. In these applications, researchers should place their weather stations in open, unobstructed locations. Buildings and trees can affect temperature, relative humidity, rainfall, wind speed, and wind direction. For this reason, weather stations should also be at a distance of at least ten times the height of nearby trees and buildings away from these obstructions.
Weather stations should be located at least ten times the height of nearby trees and buildings away from these obstructions.
Accurate soil moisture measurement probes need to have good contact with surrounding soil. Here are some tips to help with installation:
After installing the sensor into the soil, partially backfill the hole, allowing soil to settle around the sensor. Pack the soil to the same density as the undisturbed soil. Then thoroughly water the soil around the sensor to cause the soil to fully settle around the sensor.
While some data logging weather stations can be difficult to configure and often require the services of a professional system integrator for setup, today’s most advanced systems do not require programming or complex wiring. Instead, these systems leverage Smart Sensor technology, that provides the user with plug-and-play performance: once a sensor is plugged into the data logger, it is automatically recognized and can begin taking measurements. This type of system architecture can significantly reduce setup and deployment time, and reduce or eliminate the need for specialized integrator assistance.
Lawn mowers, tractors, and chemicals can damage sensor cables. Moreover, rodents, birds, cattle, and other animals can bite, peck, or trample on sensor cables. For this reason, researchers often cover cables with conduit.
Proper grounding of a weather station is advisable, as it provides protection from electrical interference and thus can help minimize the chance of system failures in the field.
As a general rule, replace rechargeable batteries every 3 to 5 years and regular batteries once a year. However, battery life depends on logging intervals. For example, with certain weather stations, if the logging interval is set at 1 second, the batteries last 30 to 50 days. If the interval is set at 1 minute, the batteries should last one year. Furthermore, make sure the batteries’ Use Before dates are at least two years from the current date.
Relative humidity, barometric pressure, wind direction and wind speed, and PAR sensors should be checked or calibrated annually.
For even more on this, read our full guide!
Click on a category to view a selection of compatible accessories with the Onset HOBO RX2103 MicroRX Water Level Station, battery-powered.
