Fluke FLUKE-T150/PRV240 Offers

Offering fast results, the voltage/continuity tester and proving unit kit features voltage/continuity and large easy-to-use buttons, bright backlights, and clear audible and physical indicators for any work situation. It provides a safe method to verify electrical test tools before using them in live tests.

Fluke T150 Two-pole Voltage and Continuity Electrical Tester

Combines safety with ease of use, this two-pole voltage and continuity tester provides fast and reliable results anywhere.

The perfect voltage tester to make your job faster, and safer

The voltage and continuity tester with backlit LCD readout and additional Ω measurement gives you fast test results the way you need them. This continuity tester has an easy to use interface with large buttons, display hold, switchable load, bright backlights and clear audible and physical indicators designed for any work situation. The two-pole voltage and continuity tester measures low Ω resistances up to 1999 Ω.

Features

• Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability
• Backlit graduated scale and backlit indicators
• Built in electric torch for use in dark areas
• Resistance testing to 1999 Ω
• Audio on/off for testing in quiet areas
• Improved probe docking for secure storage
• Phase rotation indicator for 3-phase systems
• Display hold freezes reading on display until your can view it comfortably
• Single-pole phase test offers fast identification of live conductors
• Push-on probe tips, probe tip protector and storage accessory
• Tip protector serves as an extra hand when opening UK electrical safety outlets
• Low battery indicator

Applications

• Electrical contractors
• Power, energy, and utility plants
• Industrial engineering
• Factories, schools, and hospitals

Fluke PRV240 Proving Unit

Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.

Features

• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Long battery life - 5,000 tests per set of four AA batteries

Test Before Touch

Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of "Test Before Touch" (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Designed for safety and compliance

Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.

Applications

• Test and measurement