Conveniently test the function and safety of electric vehicle charging stations with this charging station adapter that comes complete with a type 1 connector and cable. While simulating the presence of an electric vehicle, this adapter performs a variety of tests and provides easy performance and maintenance testing.
Conveniently test the function and safety of electric vehicle charging stations with this charging station adapter that comes complete with a type 1 connector and cable. While simulating the presence of an electric vehicle, this adapter performs a variety of tests and provides easy performance and maintenance testing.
Monitor the nominal voltage of the station voltage by connecting this adapter and selecting either state C or D using the rotary switch to start the charging cycle. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for effortless performance and maintenance testing.
Features
Test the functionality and safety of electrical vehicle charging stations, easily and reliably
Test the safety and performance of type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with this adapter. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use it to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
Safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all with one adapter that safely integrates with the portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Applications
Input Voltage | UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 208 V, 60 Hz (three-phase system) UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 240 V, 60 Hz (single-phase system) ±10 % voltage fluctuations from nominal 2 |
EV connector (EVC-13) | SAE J1772 socket, 16 A (type 1, 5P single-phase) |
Internal power consumption | 2 W maximum |
Temperature | Operating: -4 to 104°F (-20 to 40 °C) Storage: -4 to 122°F (-20 to 50°C) |
Humidity | Operating range: 10 to 85% relative humidity non-condensing Storage: 0 to 85% non-condensing |
Operating Altitude | 6561’ (2000 m) maximum |
Dimensions | 8.66 x 4.33 x 1.77" (220 x 110 × 45 mm) without cable assembly |
Weight | 4.4 lbs (2 kg) |
Click on a category to view a selection of compatible accessories with the Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable.
Input Voltage | UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 208 V, 60 Hz (three-phase system) UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 240 V, 60 Hz (single-phase system) ±10 % voltage fluctuations from nominal 2 |
EV connector (EVC-13) | SAE J1772 socket, 16 A (type 1, 5P single-phase) |
Internal power consumption | 2 W maximum |
Temperature | Operating: -4 to 104°F (-20 to 40 °C) Storage: -4 to 122°F (-20 to 50°C) |
Humidity | Operating range: 10 to 85% relative humidity non-condensing Storage: 0 to 85% non-condensing |
Operating Altitude | 6561’ (2000 m) maximum |
Dimensions | 8.66 x 4.33 x 1.77" (220 x 110 × 45 mm) without cable assembly |
Weight | 4.4 lbs (2 kg) |
Click on a category to view a selection of compatible accessories with the Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable.