An adjustable insertion flowmeter featuring electromagnetic technology to accurately and reliably measure fluid velocity, and provides several continuous signal outputs. Offers a high accuracy of 1% of reading, and comes equipped with an LCD display, and is custom configured.
An adjustable insertion flowmeter featuring electromagnetic technology to accurately and reliably measure fluid velocity, and provides several continuous signal outputs. Offers a high accuracy of 1% of reading, and comes equipped with an LCD display, and is custom configured.
Features
Applications
Service | Compatible clean or dirty non coating, conductive liquids |
Range | 0 to 20 ft/s (0 to 6 m/s) |
Wetted Materials | Body shaft/fitting: 316 SS Electrodes: 316 SS Electrode cap: Polymer/Polystyrene O-ring: Silicon |
Accuracy | ±0.5% of reading at calibrated velocity; ±1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ±0.02 ft/s (±0.006 m/s) at <2 ft/s (0.6 m/s) |
Temperature Limits | Ambient: -20 to 160°F (-29 to 71°C) Process: 15 to 250°F (-9 to 121°C) Storage: -40 to 185°F (-40 to 85°C) |
Process Connection | 1" NPT |
Pressure | Limits: 400 psi (27.6 bar) @ 100°F (37.8°C) Drop: <0.1 psi at 12 ft/s in 4" (101.6 mm) and larger pipe |
Outputs | (1) Analog: 4 to 20 mA, 0 to 5 V, 0 to 10 V or 2 to 10 V (display selectable) (1) Pulse/Frequency: 0 to 15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable) (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable) (1) Reverse flow output indication |
Power Requirements | 12 to 42.4 VDC, 0.25 A @ 24 VDC; 12 to 36 VAC |
Display | 2 x 2" (5.08 x 5.08 cm) graphic LCD with backlight |
Conductivity | >20 microsiemens |
Enclosure | Material: Powder coated die cast aluminum Ratings: NEMA 4X (IP66) |
Agency Approvals | BTL, CE, NSF/ANSI 61 and 372 |
Click on a category to view a selection of compatible accessories with the Dwyer IEF Insertion Electromagnetic Flow Transmitter with LCD display, custom configured.
Service | Compatible clean or dirty non coating, conductive liquids |
Range | 0 to 20 ft/s (0 to 6 m/s) |
Wetted Materials | Body shaft/fitting: 316 SS Electrodes: 316 SS Electrode cap: Polymer/Polystyrene O-ring: Silicon |
Accuracy | ±0.5% of reading at calibrated velocity; ±1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ±0.02 ft/s (±0.006 m/s) at <2 ft/s (0.6 m/s) |
Temperature Limits | Ambient: -20 to 160°F (-29 to 71°C) Process: 15 to 250°F (-9 to 121°C) Storage: -40 to 185°F (-40 to 85°C) |
Process Connection | 1" NPT |
Pressure | Limits: 400 psi (27.6 bar) @ 100°F (37.8°C) Drop: <0.1 psi at 12 ft/s in 4" (101.6 mm) and larger pipe |
Outputs | (1) Analog: 4 to 20 mA, 0 to 5 V, 0 to 10 V or 2 to 10 V (display selectable) (1) Pulse/Frequency: 0 to 15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable) (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable) (1) Reverse flow output indication |
Power Requirements | 12 to 42.4 VDC, 0.25 A @ 24 VDC; 12 to 36 VAC |
Display | 2 x 2" (5.08 x 5.08 cm) graphic LCD with backlight |
Conductivity | >20 microsiemens |
Enclosure | Material: Powder coated die cast aluminum Ratings: NEMA 4X (IP66) |
Agency Approvals | BTL, CE, NSF/ANSI 61 and 372 |
Click on a category to view a selection of compatible accessories with the Dwyer IEF Insertion Electromagnetic Flow Transmitter with LCD display, custom configured.