- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Right Choice. Right Price. Right NOW.
Image is for reference only, refer to product info for complete details.
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Differential pressure gauge, range 0-0.50" w.c., minor divisions .01, calibrated for vertical scale position.
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
| Dimensions | 4" (101.6 mm) diameter dial face |
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back |
| Dimensions | 4" (101.6 mm) diameter dial face |
