- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Works with USB RF peak power sensors, this RF power meter extends its capabilities and eliminates the need for a remote computer. With two channels and GPIB, it supports capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains through an intuitive, multi-touch touchscreen display.
Works with USB RF peak power sensors, this RF power meter extends its capabilities and eliminates the need for a remote computer. With two channels and GPIB, it supports capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains through an intuitive, multi-touch touchscreen display.
Available with a selection of trigger options and channel synchronization settings that provides as the perfect tool set for working with multiple channel measurements.
Features
Applications
| Channels | 2 channels |
| Display | Display Size: 5" WVGA multi-touch display with intuitive graphical user interface Display Modes: Graph (power vs time) - Numeric (numeric data) - Statistical measurements - CCDF Automatic measurements (pulse, statistical, and marker measurements) |
| Marker Measurements (in Graph view) | Markers (vertical cursors): Settable in time relative to the trigger position Marker Independently: Average, Minimum, and Maximum Power at a specified time offset Interval Between Markers: Average, Minimum, and Maximum Power over the defined interval Pair of Markers: Ratio of power values at each marker |
| Pulse Mode | Automatic Measurements: Pulse rise-time - Pulse fall-time - Pulse width - Pulse off-time - Pulse period - Pulse repetition frequency Pulse duty cycle - Waveform average - Pulse peak - Pulse average - Pulse overshoot - Pulse droop Top level power - Bottom level power - Edge delay - Pulse edge skew between channels |
| Statistical Mode | Automatic Measurements: Peak power - Average power - Minimum power - Peak to average ratio - Dynamic range Percent at cursor - Crest factor at cursor - Crest factor at various percents |
| Trigger | Synchronization: Internal trig distribution Mode: Normal, Auto, Auto Pk-to-Pk, Free Run Source: Any connected RTP Series sensor (via SMB’s) or rear panel external trigger Internal Level Range: -40 dBm to +20 dBm (sensor dependent) External Level Range: ± 5 volts or TTL Slope: + or - Hold-off, Min Pulse Width, Max Trigger Rate: Sensor and timebase dependent |
| Time Base | Resolution, Range, Accuracy: Sensor dependent Display: Sweeping or roll mode Trigger Delay Range: Sensor dependent Trigger Delay Resolution: 0.02 divisions |
| Remote Control | Command Set: SCPI-1999.0 LAN: Ethernet: 10/100/1000 BaseT; HiSLIP GPIB: Yes |
| Construction | Manufactured to the intent of MIL-PRF-28800F, Class 3 |
| AC Power | Rated Voltage: 100 to 240 VAC Voltage Range: 90 to 264 VAC Rated Frequency:50/60 Hz Frequency Range: 47 to 63 Hz |
| Temperature | Operating:32 to 122°F ( 0 to 50°C) Storage: -40 to 158°F (-40 to 70°C) |
| Humidity | 95% maximum, non-condensing |
| Altitude Operation | Up to 15,000' (4575 m) |
| Dimensions (excluding connectors) | 3.5 x 8.3 x 11.2" (89 x 211 x 284 mm) |
| Weight | 4.8 lbs (2.2 kg) |
Click on a category to view a selection of compatible accessories with the B&K RFM3000 RF Power Meter with GPIB, 2 channels.
| Channels | 2 channels |
| Display | Display Size: 5" WVGA multi-touch display with intuitive graphical user interface Display Modes: Graph (power vs time) - Numeric (numeric data) - Statistical measurements - CCDF Automatic measurements (pulse, statistical, and marker measurements) |
| Marker Measurements (in Graph view) | Markers (vertical cursors): Settable in time relative to the trigger position Marker Independently: Average, Minimum, and Maximum Power at a specified time offset Interval Between Markers: Average, Minimum, and Maximum Power over the defined interval Pair of Markers: Ratio of power values at each marker |
| Pulse Mode | Automatic Measurements: Pulse rise-time - Pulse fall-time - Pulse width - Pulse off-time - Pulse period - Pulse repetition frequency Pulse duty cycle - Waveform average - Pulse peak - Pulse average - Pulse overshoot - Pulse droop Top level power - Bottom level power - Edge delay - Pulse edge skew between channels |
| Statistical Mode | Automatic Measurements: Peak power - Average power - Minimum power - Peak to average ratio - Dynamic range Percent at cursor - Crest factor at cursor - Crest factor at various percents |
| Trigger | Synchronization: Internal trig distribution Mode: Normal, Auto, Auto Pk-to-Pk, Free Run Source: Any connected RTP Series sensor (via SMB’s) or rear panel external trigger Internal Level Range: -40 dBm to +20 dBm (sensor dependent) External Level Range: ± 5 volts or TTL Slope: + or - Hold-off, Min Pulse Width, Max Trigger Rate: Sensor and timebase dependent |
| Time Base | Resolution, Range, Accuracy: Sensor dependent Display: Sweeping or roll mode Trigger Delay Range: Sensor dependent Trigger Delay Resolution: 0.02 divisions |
| Remote Control | Command Set: SCPI-1999.0 LAN: Ethernet: 10/100/1000 BaseT; HiSLIP GPIB: Yes |
| Construction | Manufactured to the intent of MIL-PRF-28800F, Class 3 |
| AC Power | Rated Voltage: 100 to 240 VAC Voltage Range: 90 to 264 VAC Rated Frequency:50/60 Hz Frequency Range: 47 to 63 Hz |
| Temperature | Operating:32 to 122°F ( 0 to 50°C) Storage: -40 to 158°F (-40 to 70°C) |
| Humidity | 95% maximum, non-condensing |
| Altitude Operation | Up to 15,000' (4575 m) |
| Dimensions (excluding connectors) | 3.5 x 8.3 x 11.2" (89 x 211 x 284 mm) |
| Weight | 4.8 lbs (2.2 kg) |
Click on a category to view a selection of compatible accessories with the B&K RFM3000 RF Power Meter with GPIB, 2 channels.
