The wire tracer kit is designed to locate wires, breakers, and fuses. When the transmitter is connected to the circuit the receiver detects transmitted signals in wires or cables behind walls, ceilings, and floors. The transmitter also features a high signal mode for general tracing and a loop mode designed for locating shorts.
The wire tracer kit is designed to locate wires, breakers, and fuses. When the transmitter is connected to the circuit the receiver detects transmitted signals in wires or cables behind walls, ceilings, and floors. The transmitter also features a high signal mode for general tracing and a loop mode designed for locating shorts.
With the AT-6010 advanced wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers and fuses. When the transmitter is connected to the circuit, the receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The transmitter works on energized and de-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Features
Applications
Amprobe AM-530 True-rms Electrical Contractor Multimeter
Measure and verify presence of voltage in order to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors or check transformers. The AM-530 is True-RMS sensing to accurately measure voltage on systems affected by harmonics as well as a built-in flashlight to detect wire colors in the dark, a "third hand" probe holder and VolTect™ non-contact voltage detection.
Features
Receiver | |
Measurement Category | CAT III 600 V |
Operating Voltage | 0 to 600 V AC/DC |
Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
Signal Indications | Numeric, bar graph display and audible beep |
Response Time | Tip sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
Range Detection (Open Air) | Tip sensor (Energized): Max distance via air: up to 20' (6.1 m) Pinpointing: approx. 1.97" (5 cm) Tip sensor (De-energized): Max distance via air: up to 14.7' (4.5 m) Pinpointing: approx. 1.97" (5 cm) |
Transmitter | |
Measurement Category | CAT III 600 V |
Operating Voltage | 0 to 600 V AC/DC |
Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
Hazardous Voltage Detection | >30 V AC/DC |
Signal Indications | LEDs |
Response Time | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
With this wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers, and fuses. It includes a transmitter and receiver to easily detect the signal in wires or cables behind walls, ceilings, and floors.
Measure and verify the presence of voltage to connect equipment or perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors, or check transformers which makes it the ideal tool for electrical contractors. Additionally, this multimeter features True RMS sensing.
Receiver | |
Measurement Category | CAT III 600 V |
Operating Voltage | 0 to 600 V AC/DC |
Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
Signal Indications | Numeric, bar graph display and audible beep |
Response Time | Tip sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
Range Detection (Open Air) | Tip sensor (Energized): Max distance via air: up to 20' (6.1 m) Pinpointing: approx. 1.97" (5 cm) Tip sensor (De-energized): Max distance via air: up to 14.7' (4.5 m) Pinpointing: approx. 1.97" (5 cm) |
Transmitter | |
Measurement Category | CAT III 600 V |
Operating Voltage | 0 to 600 V AC/DC |
Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
Hazardous Voltage Detection | >30 V AC/DC |
Signal Indications | LEDs |
Response Time | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
With this wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers, and fuses. It includes a transmitter and receiver to easily detect the signal in wires or cables behind walls, ceilings, and floors.
Measure and verify the presence of voltage to connect equipment or perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors, or check transformers which makes it the ideal tool for electrical contractors. Additionally, this multimeter features True RMS sensing.