Great for small to mid-fiber count applications, this fusion splicer prepares and loads both fibers simultaneously with patented sheath clamps and Active Fusion Control for arc optimization. Moreover, this kit includes a cleaver, a single fiber stripper, fiber holders, set plates, spare electrodes, a battery pack, and more.
Great for small to mid-fiber count applications, this fusion splicer prepares and loads both fibers simultaneously with patented sheath clamps and Active Fusion Control for arc optimization. Moreover, this kit includes a cleaver, a single fiber stripper, fiber holders, set plates, spare electrodes, a battery pack, and more.
The 45S cladding alignment fusion splicer is transforming the fiber splicing process in small to mid-fiber count applications. This Fujikura splicer introduces a groundbreaking enhancement by enabling the simultaneous preparation and loading of both fibers. The handheld fiber coating stripper, SS-05, efficiently strips two 250 μm coated fibers in a single pass, complemented by the CT-16A cleaver adapter plate, which can cleave two bare fibers concurrently. Post-preparation, the patented sheath clamps of the 45S facilitate loading both fibers simultaneously into the splicer, with one fiber in each hand. The user can effortlessly close the sheath clamp base by pressing down, allowing for convenient one-handed operation while positioning the fibers in the v-grooves.
Moreover, the 45S sheath clamps are intricately connected to the wind protector. Upon completion of the splicing process, opening the wind protector automatically releases both sheath clamps, facilitating swift sleeve positioning and transfer to the tube heater. The 45S tube heater excels in rapid sleeve shrinking, outperforming its predecessor with a nominal heat time of approximately 20 seconds for 60 mm sleeves, down from the previous ~26 seconds. The concurrent capability of fiber preparation, automated sheath clamp opening, and a faster tube heater collectively contribute to a reduction of over 30% in the overall fusion splicing cycle time.
The 45S enhances user experience through advancements in fiber placement, battery access, and machine ergonomics. In previous models, an error would occur, necessitating manual intervention if the cleaved fiber was inadvertently set beyond the electrode centerline while using sheath clamps. The 45S, however, can now automatically correct this mistake by reversing the fiber to the correct position. Featuring a compact cube form factor, the 45S is effortlessly portable and adaptable to space-constrained environments. Its adjustable screen mitigates glare from the sun and accommodates unconventional splicer positions encountered in challenging splice locations.
Features
Applications
Fiber Alignment Method | Active cladding alignment |
Fiber Count Can Be Spliced | Single fiber |
Applicable Fiber | Fiber type: Single mode optical fiber/multi mode optical fiber Cladding diameter: 125 μm approximately |
Applicable Coating | Sheath Clamp Coating diameter: 3000 μm maximum Cleave length: 5 to 16 mm Fiber Holder: Coating diameter: 160 μm to 3000 μm based on available fiber holder options Cleave length: 10 mm approximately |
Fiber Splice Performance | Splice loss ITU-T G.652: Average 0.03dB ITU-T G.651: Average 0.01dB ITU-T G.653: Average 0.05 dB ITU-T G.655: Average 0.05 dB ITU-T G.657: Average 0.03dB Splicing time SM FAST mode: Average 6 to 7 seconds SM AUTO mode: Average 8 to 10 seconds |
Applicable Protection Sleeve | Sleeve type heat shrinkable sleeve Sleeve length maximum 66 mm Sleeve diameter maximum 6 mm before shrinking Sleeve heat performance heat time 60 mm mode: Average 15 to 22 seconds 60 mm slim mode: Average 15 to 17 seconds |
Fiber Tensile Test Force | 2.0 N approximately |
Electrode Life | 6000 splices approximately |
Display | LCD monitor TFT 4.95" (12.5 cm) with touch screen Magnification approximation 132 to 300 X Illumination V-grooves LED lamp |
Interface | PC USB 2.0 mini B type External LED lamp USB 2.0 A type approximately DC 5 V, 500 mA Wireless Bluetooth® 5.2 |
Environmental Condition | Temperature Operate: 14 to 122°F (-10 to 50°C) Storage: -40 to 176°F (-40 to 80°C) Humidity Operate: 0 to 95% non-condensing Storage: 0 to 95% non-condensing Altitude Maximum: 16404' (5000 m) |
AC Adaptor | Input AC 100 to 240 V, 50/60 Hz, maximum 1 A Output approximately DC 19 V, maximum 2.1 A |
Battery Pack | Battery type: Rechargeable lithium ion Output approximately DC 14.4 V / 3190 mAh Capacity 60 mm heat mode: Approximately 200 splice & heat cycles 60 mm slim heat mode: Approximately 230 splice & heat cycles Battery temperature: Operate: 14 to 122°F (-10 to 50°C) Recharge: 32 to 104°F (0 to 40°C) Short term storage of 30 days: -4 to 122°F (-20 to 50°C) Long term storage: -4 to 86°F (-20 to 30°C) Battery Life: Approximately 500 recharge cycles |
Dimensions | 5.1 x 4.8 x 4.7" (131 x 123 x 121 mm) without projection |
Weight | Approximately 3 lbs (1.4 kg) including battery |
Fiber Alignment Method | Active cladding alignment |
Fiber Count Can Be Spliced | Single fiber |
Applicable Fiber | Fiber type: Single mode optical fiber/multi mode optical fiber Cladding diameter: 125 μm approximately |
Applicable Coating | Sheath Clamp Coating diameter: 3000 μm maximum Cleave length: 5 to 16 mm Fiber Holder: Coating diameter: 160 μm to 3000 μm based on available fiber holder options Cleave length: 10 mm approximately |
Fiber Splice Performance | Splice loss ITU-T G.652: Average 0.03dB ITU-T G.651: Average 0.01dB ITU-T G.653: Average 0.05 dB ITU-T G.655: Average 0.05 dB ITU-T G.657: Average 0.03dB Splicing time SM FAST mode: Average 6 to 7 seconds SM AUTO mode: Average 8 to 10 seconds |
Applicable Protection Sleeve | Sleeve type heat shrinkable sleeve Sleeve length maximum 66 mm Sleeve diameter maximum 6 mm before shrinking Sleeve heat performance heat time 60 mm mode: Average 15 to 22 seconds 60 mm slim mode: Average 15 to 17 seconds |
Fiber Tensile Test Force | 2.0 N approximately |
Electrode Life | 6000 splices approximately |
Display | LCD monitor TFT 4.95" (12.5 cm) with touch screen Magnification approximation 132 to 300 X Illumination V-grooves LED lamp |
Interface | PC USB 2.0 mini B type External LED lamp USB 2.0 A type approximately DC 5 V, 500 mA Wireless Bluetooth® 5.2 |
Environmental Condition | Temperature Operate: 14 to 122°F (-10 to 50°C) Storage: -40 to 176°F (-40 to 80°C) Humidity Operate: 0 to 95% non-condensing Storage: 0 to 95% non-condensing Altitude Maximum: 16404' (5000 m) |
AC Adaptor | Input AC 100 to 240 V, 50/60 Hz, maximum 1 A Output approximately DC 19 V, maximum 2.1 A |
Battery Pack | Battery type: Rechargeable lithium ion Output approximately DC 14.4 V / 3190 mAh Capacity 60 mm heat mode: Approximately 200 splice & heat cycles 60 mm slim heat mode: Approximately 230 splice & heat cycles Battery temperature: Operate: 14 to 122°F (-10 to 50°C) Recharge: 32 to 104°F (0 to 40°C) Short term storage of 30 days: -4 to 122°F (-20 to 50°C) Long term storage: -4 to 86°F (-20 to 30°C) Battery Life: Approximately 500 recharge cycles |
Dimensions | 5.1 x 4.8 x 4.7" (131 x 123 x 121 mm) without projection |
Weight | Approximately 3 lbs (1.4 kg) including battery |