This Current Probe is designed for use in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This Current Probe is designed for use in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This general purpose 1000AAC current probe is designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per amp to the current measured in the jaw. The SR651 has jack output terminations that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important.
Features
Applications
Nominal Range | 1000A |
Measurement Range | 0.1 to 1200A |
Transformation Ratio | Voltage output |
Output Signal | 1mV/A AC/A AC (1V AC at 1000A) |
Accuracy (1000A Range) | 1 to 50A: ≤3% ± 0.1A 50 to 200A: 1.5% of Reading 200 to 1000A: 0.75% of Reading 1000 to 1200A: 0.5% of Reading |
Phase Shift (1000A Range) | 50 to 200A: 1.5° 200 to 1000A: 0.75° 1000 to 1200A: 0.5° |
Overload | 1200A for 40 min ON, 20 min OFF |
Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
Load Impedance | 100kΩ min |
Working/Common Mode Voltage | 600V Cat. III |
Output Termination | Jack |
Nominal Range | 1000A |
Measurement Range | 0.1 to 1200A |
Transformation Ratio | Voltage output |
Output Signal | 1mV/A AC/A AC (1V AC at 1000A) |
Accuracy (1000A Range) | 1 to 50A: ≤3% ± 0.1A 50 to 200A: 1.5% of Reading 200 to 1000A: 0.75% of Reading 1000 to 1200A: 0.5% of Reading |
Phase Shift (1000A Range) | 50 to 200A: 1.5° 200 to 1000A: 0.75° 1000 to 1200A: 0.5° |
Overload | 1200A for 40 min ON, 20 min OFF |
Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
Load Impedance | 100kΩ min |
Working/Common Mode Voltage | 600V Cat. III |
Output Termination | Jack |